PCB Global Blog
Latest News.

Immersion Gold / ENIG / Immersion Silver / Immersion Tin / Palladium / OSP / ROHS HAL / HASL Leaded / Electrolytic Gold Finger / Laser Drilling / Laser Routing / Copper filled Micro-Vias/

It is common practice that PCB Global’s Computer Aided manufacturing (CAM) Engineering department will invariably have a few Engineering Questions, also know as, EQ’s to confirm. One example of a typical EQ concerning V-Cut Through Tooling Holes is shown below:

V-Cut Through Tooling Holes

EQ from CAM:

V-grooving lines cutting through the tooling holes on the tooling strips.

Explanation:

The customers panellised files were set up with the v-grooving cutting through the tooling holes. V-grooving must be designed to avoid cutting through tracks, pads, holes and all copper plane areas. As a rule, it is best to have all v-cuts on bare fibreglass only (see below).

Resolution:

With confirmation from our customer both these two tooling holes were moved 10mm to the left to avoid the v-cut.

For further tips and information when designing and laying out your printed circuit board design file please do not hesitate to contact our PCB Global team at sales@pcbglobal.com

COPY TO CLIPBOARD SELECT ALL © FreeFormatter.com - FREEFORMATTER is a d/b/a of 10174785 Canada Inc. - Copyright Notice - Privacy Statement - Terms of Use